J. Jang, B. Bouveret, R. F. Gibson and J. Suhr, “Numerical simulation of particle diameter and interphase effects on coefficient of thermal expansion of SiO2/epoxy particulate composites”, Polymer Composites, Vol. 33(8), pp. 1415~1423, 2012.

J. Jang, J. Varischetti and J. Suhr, “Strain dependent energy dissipation in multi-scale carbon fiber composites containing carbon nanofibers”, Carbon, Vol. 50, pp. 4277-4283, 2012.

J. Sargianis and J. Suhr, “Core material effect on wave number and vibrational damping characteristics in carbon fiber sandwich composites”, Composites Science and Technology, Vol. 72 (13), pp. 1493~1499, 2012.

J. Sargianis and J. Suhr, “Effect of core thickness on wave number and damping properties in sandwich composites”, Composites Science and Technology, Vol. 72 (6), pp. 724~730, 2012 .

J. Sargianis, H.I. Kim and J. Suhr, “Natural cork agglomerate employed as an environmentally friendly solution for quiet sandwich composites”, Scientific Reports, 2, Article 403, doi:10.1038/srep00403, 2012.

J. Jang, J. Varischetti, G.W. Lee, and J. Suhr, “Experimental and analytical investigation of mechanical damping and CTE of both SiO2 particle and carbon nanofiber reinforced hybrid epoxy composites”, Composites Part A, Vol. 42(1), pp. 98~103, 2011.

M. Cho, J. Jang and J. Suhr, “Effect of filler geometry on CTE in carbon nanofiber reinforced epoxy composites”, Journal of Nanoscience and Nanotechnology, Vol. 11, pp. 1098~1102, 2011.

J. Suhr, L. Ci, V. Pushparaj, X. Zhang and P. M. Ajayan, “Continuous carbon nanotube reinforced composites”, Nano Letters, Vol. 8(12), pp. 2762~2766, 2008.

L. Sun, R. Gibson, F. Gordaninejad and J. Suhr, “Energy absorption capability of nanocomposites: A review”, Composite Science & Technology, Vol. 69(14), pp. 2392~2409, 2008.

J. Suhr and N. A. Koratkar, “Energy dissipation in carbon nanotube composites: A review”, Journal of Material Science, Vol. 43, pp. 4370~4382, 2008.

V. Pushparaj, L. Ci, S. Sreekala, A. Kumar, S. Kesapragada, D. Gall, O. Nalamasu, P. Ajayan and J. Suhr, “Effects of compressive strains on electrical conductivities of a macroscale carbon nanotube block”, Applied Physics Letters, Vol. 91, 153116, 2007.

J. Suhr, V. Pushparaj, L. Ci, S. Sreekala, X. Zhang, O. Nalamasu and P. Ajayan, “Viscoelastic response and fatigue resistance of carbon nanotube blocks under cyclic compression”, Nature Nanotechnology, Vol. 2, pp. 417~421, 2007.

J. Suhr, A. Joshi, L. Schadler, R. S. Kane, and N. A. Koratkar, “Effect of filler geometry on interfacial friction damping in polymer nanocomposites”, Journal of Nanoscience and Nanotechnology, Vol. 7(4-5), pp. 1684~1687, 2007.

J. Ryoo, P. Hajela, J. Suhr and N. Koratkar, “Estimation of Young's modulus of single-walled carbon nanotube using cellular automata”, Advances In Engineering Software, Vol. 38, pp. 531~537, 2007.

J. Suhr, W. Zhang, P. Ajayan and N. Koratkar, “Temperature activated interfacial friction damping in carbon nanotube polymer composites”, Nano Letters, Vol. 6(2), pp. 219~223, 2006.

J. Suhr and N. Koratkar, “Effect of pre-strain on nanotube-polymer sliding energy dissipation mechanism”, Journal of Nanoscience and Nanotechnology, Vol. 6(2), pp. 483~486, 2006.

W. Zhang, J. Suhr and N. Koratkar, “Observation of high buckling stability in carbon nanotube polymer composites”, Advanced Materials, Vol. 18(4), pp. 452~456, 2006.

J. Suhr, N. Koratkar, D.-X. Ye and T.-M. Lu, “Damping properties of epoxy films with nanoscale fillers”, Intelligent Materials Systems and Structures, Vol. 17(3), pp. 255~260, 2006.

W. Zhang, J. Suhr and N. Koratkar, “Multi-functional polymer nanocomposite for self strain sensing”, Journal of Nanoscience and Nanotechnology, Vol. 6(4), pp. 960~964, 2006.

D.-B. Cho, J. Suhr and N. Koratkar, “Carbon nanotube thin film coating for improved thermal management in piezoceramic sheet actuators”, Intelligent Materials Systems and Structures, Vol. 17(3), pp. 209~216, 2006.

P. Ajayan, J. Suhr and N. Koratkar, “Utilizing interfaces in carbon nanotube reinforced polymer composites for structural damping”, Journal of Material Science, Vol. 41(23), pp. 7824~7829, 2006.

J. Suhr, N. Koratkar, P. Keblinski and P. Ajayan, “Viscoelasticity in carbon nanotube composites”, Nature Materials, Vol. 4, pp. 134~137, 2005.

N. Koratkar, J. Suhr, A. Joshi, R. Kane, L. Schadler, P. Ajayan, and S. Bartolucci, “Characterizing energy dissipation in single-walled carbon nanotube polycarbonate composites”, Applied Physics Letters, Vol. 87, 063102, 2005.

M.-W. Suh, J. Suhr, and W.-H. Yang, “Condensed joint matrix method for the joint structure of the vehicle body”, Proceedings of the Institute of Mechanical Engineers, Part D, Journal of Automobile Engineering, Vol. 216(D1), pp. 35~41, 2002.