It's always a good idea to have the state of your K2 stored away in case your rig ever requires a reset or undergoes some other event catastrophic to the stored settings. This program uses the K2's KIO2 serial port to grab those settings.
REMEMBER! You must plug the frequency counter probe into the BFO TP2 (Test Point 2) in order to retrieve BFO settings. That part's not wireless. :-)
Turn on your K2, note the serial port, and start the program. When you click the "Read Settings" button, the program will ask you for a file name. This is the file where your settings will be written. The K2 display will begin quickly flipping through settings as they are read. Don't worry, this is expected and will take a couple minutes to complete.
Run it on this page.
IMPORTANT! For K2/100 rigs, after retrieving your settings remember to unplug and remove the frequency counter probe.
Here is the actual output of the program when run against my K2. If you have a KDSP2 board, the program will also print out those settings. You can see I reset my mine pretty close to factory defaults for this run.
ST L 160 ST P 0.60 T-R 0.02 RPT 006 INP PDLN IAB A SSBA 3 SSBC 2-I LCD NITE GRPH DOT OPT PERF ATU AUTO RANT OFF PF1 ST L PF2 ST P SLCH 0FF RATES 3R DOT 0.90 FPLY 45 PORT ON SPLT NOR PO28 10.0 RTTY ON RTC ON RIT 0.6 ACC -- D19 Y PA ON TRN1 OFF TRN2 OFF TRN3 OFF CAL CUR 3.50 TPA 12C S LO 181 S HI 020 Filter settings CW: FL1 1.70C FL2 1.00C FL3 0.40C FL4 0.20C CW rev: FL1 1.70C FL2 1.00C FL3 0.40C FL4 0.20C LSB: FL1 OP1L FL2 OP1L FL3 1.80L FL4 0.70L USB: FL1 OP1U FL2 OP1U FL3 1.80U FL4 0.70U RTTY: FL1 OP1R FL2 OP1R FL3 1.80R FL4 1.60R RTTY rev: FL1 OP1R FL2 OP1R FL3 1.80R FL4 1.60R BFO settings CW: 04913.51C 04913.27C 04913.07C 04913.04C CW rev: 04915.38C 04914.46C 04914.29C 04914.25C LSB: 04913.64L 04913.54L 04913.03L 04912.41L USB: 04916.67U 04916.61U 04916.09U 04915.25U RTTY: 04913.67R 04913.64R 04913.12R 04912.87R RTTY rev: 04916.63R 04916.63R 04916.06R 04915.84R DSP settings C1 NR C1 LPASS DSP ON NR 89 70 CN G 0.0 CF G 0.0 C2 NR C2 .60 .80 DSP ON NR 89 70 CN G 0.0 CF G 0.0 C3 NR C3 .60 .25 DSP ON NR 89 70 CN G 0.0 CF G 0.0 C4 NR C4 .60 .10 DSP ON NR 89 70 CN G 0.0 CF G 0.0 S1 NR NT S1 LPASS DSP ON NR 89 70 NT 40 07 SN G 7.0 SF G 0.0 S2 NR NT S2 .20 2.5 DSP ON NR 89 70 NT 40 07 SN G 7.0 SF G 0.0 S3 NR NT S3 .30 1.9 DSP ON NR 89 70 NT 40 07 SN G 7.0 SF G 0.0 S4 NR NT S4 .30 1.6 DSP ON NR 89 70 NT 40 07 SN G 7.0 SF G 0.0 R1 LPASS DSP ON RF G 0.0 R2 2.5 1.0 DSP ON RF G 0.0 R3 2.2 .30 DSP ON RF G 0.0 R4 1.0 .20 DSP ON RF G 0.0